Introduction Shell Tellus S2 V15 industrial hydraulic oil Shell Tellus T Oil Shell Tellus T hydraulic oil is made from high quality mineral base oils and a selection of additives. These include: viscosity index improvers, antiwear agents, corrosion inhibitors, antioxidants, pour point depressant and anti-foam agents. Recommended application hydraulic oil Shell Tellus T can be widely used in hydraulic and hydraulic transmission systems, particularly in those temperature range or viscosity affected by the temperature change is small occasions. This product is also suitable for the lubrication of the gear actuator ordinary load, bearings and other mechanical parts. Performance characteristics high viscosity index, change in oil viscosity with temperature is small at low temperatures and exhibit good pumpability. This feature of the hydraulic system to work under extreme temperature conditions are particularly useful. Viscosity index improver having a high shear stability, viscosity of the oil to ensure that even under prolonged heavy loads and working conditions can be maintained stable. Outstanding abrasion resistance, in the vane pump test (IP281) and in other types of vane pump test, Shell Tellus T data is very low wear. This performance to ensure long life pumps and systems. Excellent filtration performance, in the event of contamination of water and calcium and the like can minimize filter clogging, significant cost savings for the purchase of fine filters. Excellent defense "crawl" performance, the use of advanced hydraulic cylinder sealing materials, if the machine is in the low load or low-speed fixed line status, likely to cause "crawling" phenomenon. Shell Tellus T can effectively overcome this phenomenon. Highly effective anti-corrosion in fresh and salt water corrosion test (ASTM D665) doing well. Can provide long-term corrosion protection for steel and non-ferrous metals. Good air release properties, to avoid cavitation and cavitation. Good water separation properties, in the ASTM D1401 test, this product could be completely separated in a very short time with water. Technical Specifications Shell Tellus T hydraulic oil meets the following specifications: DIN51524 second part of the third part of the ISO level L-HV VICKERS ISO6743 / 4 of I-286-S, M-2952-S Cincinnati-Milacron P68, P68, P70 Typical data Shell Tellus T15 T32 T37 T46 T68 T100 density of 15 ℃ kg / l 0.872 0.872 0.872 0.874 0.877 0.877 Viscosity 40 ℃ mm2 / s 15 32 37 46 68 100 Viscosity 100 ℃ mm2 / s 3.86 6.26 7.0 8.2 10.9 15.2 Viscosity Index 151 152,150,153,151,150 Flash point (open cup) ℃ 160 242 244 246 252 260 Pour Point ℃ -42 -42 -39 -39 -36 -30